5 Common Drain Pipe Problems and How to Fix Them

Healthy pipes should not run slowly. Another telltale sign that you have a drain problem is that it frequently gets clogged. As a homeowner, you should never underestimate the seriousness of drainage problems. A clogged or slow-moving drain may seem like a small problem, but it can quickly turn into a much bigger problem.

Slow drains can indicate a variety of problems, such as the early stages of a blockage, pipes that have been narrowed due to the accumulation of minerals or grease, or even an improper leveling of the drain system. By calling a drain cleaning professional as soon as you notice that the drains are slow, you can identify the source of the problem and correct it before it becomes major problems, such as damaged or broken pipes. Persistent sewer odors emanating from a drain or from your home's drains can be a sign of a serious drainage problem, and you definitely need to have it checked by a professional. It is very possible that contaminants have accumulated in the drain, causing that bad smell to leak into the house. When you call a professional plumber, you can get an expert evaluation of the real problem. Sometimes the smell can be eliminated by thoroughly cleaning the drain, and in other cases, you may need to replace broken sewer pipes to restore proper drainage and permanently eliminate the problem.

One of the most dangerous problems for sewer lines is the possibility of collapse. Older sewer lines or those that aren't well maintained are more prone to these serious problems. It is estimated that, on average, most people call a professional plumber once every three years. Common plumbing problems can include basic problems, such as faucets dripping, to major leaks. On the lower end, they can be relatively smaller and inexpensive, like a leaking faucet or an open toilet.

Leaky faucets are so common that it's rare to find someone who hasn't experienced this problem. It's not just a source of irritation; wasting water can increase your water bill and cost you money. A single faucet can leak hundreds of gallons over the course of a year. In many cases, the cause of faucets leaking is an internal washer that has become stiff, broken, worn, or detached over time. If this is the problem, it can usually be solved by someone with basic DIY skills and basic tools.

The water supply to the leaking faucet is cut off, the faucet is dismantled, the faulty washer is replaced, and then the faucet is reassembled. When the toilet bowl fills up and doesn't drain, you have a blockage. The blockage is usually caused by a mix of paper and human waste. Clogged toilets can usually be fixed with a plunger. If that doesn't work, a sewer snake or drain auger can be used to loosen the blockage. A functioning toilet can be expensive; up to 200 gallons of water can be lost every day.

The most common culprit is a faulty flap valve, which controls the water that passes from the tank to the container. This is a fairly simple solution with a toilet repair kit available at any hardware store. Low water pressure has a variety of potential causes. If only the hot water is weak, then the problem may be related to the shut-off valve of the water heater and you should make sure that it is fully open. If water is dripping from the faucet instead of spurting out, this may be a symptom of low water pressure.

This is often a problem in older homes. Low water pressure can be caused by several problems, one of the most common being pipe leaks that break, wear out, or corrode over time. If the problem is low water pressure in the shower, most often it is due to the accumulation of sediment and mineral deposits in the aerators. You can soak the aerator in vinegar to clean it. If the problem is the shower, then you should soak the shower head in vinegar or simply replace it. Plumbing issues are common in both residential and commercial properties.

Some of these issues include water leaks, clogged toilets, faulty water heaters, slow-draining sinks, broken faucets and working toilets. Therefore, it's best to keep contact information for an emergency plumbing repair service handy so they are on call when needed. A cracked sewer pipe is one plumbing issue that requires immediate attention as it can cause significant water damage if not addressed quickly. Pipe Drain and Plumbing Services are committed to respecting privacy and managing personal information provided by customers. Knowing what type of plumbing issue you're dealing with will save time and money because you'll know what questions to ask when hiring someone for repairs. Not all plumbers perform drain work so make sure you hire someone who specializes in both plumbing and drains so they have enough skill to diagnose and fix your issue quickly and efficiently. Feminine hygiene products and baby diapers pose an additional danger to plumbing pipes because they do not biodegrade and contain cotton and other fibers that have an enormous capacity to obstruct and attract other obstructing agents.

5 Common Drain Pipe Problems

  • Clogged Toilets
  • Leaky Faucets
  • Faulty Flap Valves
  • Low Water Pressure
  • Cracked Sewer Pipes

How To Fix Common Drain Pipe Problems

  • Clogged Toilets: Use a plunger or sewer snake/drain auger to loosen blockage.
  • Leaky Faucets: Shut off water supply; dismantle faucet; replace faulty washer; reassemble faucet.
  • Faulty Flap Valves: Replace with toilet repair kit available at any hardware store.
  • Low Water Pressure: Check shut-off valve on water heater; clean aerator; replace shower head; check for pipe leaks.
  • Cracked Sewer Pipes: Contact emergency plumbing repair service immediately.

Conclusion

Plumbing issues are common but knowing how to identify them will save time and money when hiring someone for repairs.

Pipe Drain & Plumbing Services, committed to respecting privacy and managing personal information provided by customers are available for emergency repairs when needed.

Leave Message

Required fields are marked *